Detection of trace amounts of citrinin in dried orange peel by using an optimized extraction method coupled with ultra‐performance liquid chromatography–tandem mass spectrometry

A fast and sensitive method involving ultra‐performance liquid chromatography–tandem mass spectrometry (UPLC–MS/MS) was introduced to detect citrinin in dried orange peel. A series of extraction, purification and chromatographic conditions was also systematically examined. With the proposed method, the obtained calibration graph was linear, with an R of 0.9996 within a concentration range of 0.5–10 ng/mL. The estimated limits of detection and quantification were 0.05 and 0.17 ng/mL, respectively. Under the selected conditions, the relative recoveries in different citrus products spiked with 1–10 ng/mL citrinin were 89.4–98.7% with RSDs of <2.5%. Compared with previously reported analytical methods, the newly developed UPLC–MS/MS method showed excellent sensitivity and good precision in detecting citrinin. The results indicated that it is a reliable and effective technique for the detection of trace citrinin in dried orange peel.     

Determination of direct orange 8 in effluent using a polypyrrole modified electrode

Electrochemical studies of direct orange 8 were carried out with a bare glassy carbon electrode (GCE) and a polypyrrole-coated GCE in aqueous acetonitrile medium using voltammetric techniques. One reversible couple around 0.3?V due to the redox reaction of the phenol group, one reduction peak around ?0.4?V due to reduction of the azo group and one oxidation peak around 1.0?V due to oxidation of the amino group were observed. Chronocoulometric studies revealed dye adsorption on the GCE. A square-wave stripping method was developed for the determination of the dye at pH 13.0, and a linear calibration equation obtained. The reproducibility in the measurement of peak currents was confirmed from the RSD value 2.8% at 0.001?mg?mL^?1 concentration. A comparison of the stripping voltammetric method with the UV-Vis spectrophotometric method was made. The determination limits are wider and the RSD value is lower in the stripping voltammetric method. The concentration of the dye present in dye effluent was determined using this method.     

Large‐Scale Synthesis of Helicene‐Like Molecules for the Design of Enantiopure Thin Films with Strong Chiroptical Activity

Helicenes are fascinating molecules owing to their unusual properties and applications in many fields from catalysis to organic electronics. Herein, we report a straightforward pathway for the synthesis of helicene‐like molecules on a gram scale in an enantiopure form. Thin‐film materials with good propagating optical properties and very high chiroptical responses have been grown by using pulsed laser ablation without altering the structure or the enantiopurity of the molecules. Moreover, electronic and vibrational circular dichroism spectroscopies coupled with theoretical calculations enabled some dependences of the chiroptical properties with the structure to be highlighted, for example, effects of rigidification, aromatization, or the state of matter (liquid versus solid).     

单斜BiVO4可见光催化降解甲基橙的形貌效应

以硝酸铋和偏钒酸铵为无机源,NaOH为pH值调节剂,三嵌段共聚物P123为表面活性剂,采用醇-水热法制备了多种形貌的单斜BiVO4.利用X射线衍射、N2吸脱附、扫描电子显微镜、X射线光电子能谱和紫外可见光漫反射等技术表征了其物化性质,并考察了这些BiVO4样品在可见光照射下降解甲基橙的催化活性.结果表明,表面活性剂和溶...     

非水溶剂热法制备(001)面暴露的F/TiO2纳米晶及其光催化活性

采用非水体系溶剂热法制备了(001)面暴露的锐钛矿相F/TiO2纳米光催化剂.结果表明,F的掺杂对TiO2纳米单晶的形成影响很大.一方面,F离子作为晶面导向剂稳定(001)晶面,形成(001)面暴露的锐钛矿相TiO2;另一方面,F离子也起到稳定剂作用,抑制纳米粒子的快速生长.以光催化降解甲基橙为模型反应比较了不同F/T...     

粒径可控的纳米铁酸铋的制备及其光催化性能

采用改进的聚丙烯酰胺凝胶法制备了BiFeO3纳米颗粒,利用热重-差热、红外光谱及X射线衍射等手段研究了干凝胶的热分解及BiFeO3的成相过程.结果表明,在600℃煅烧可制备出高纯的BiFeO3纳米颗粒.同时发现,随着双丙烯酰胺含量的增加,所得样品晶粒尺寸逐渐减小,从而制备出平均粒径约52～110nm的系列BiFeO3颗...     

静电自组装制备纳米TiO2/SiO2光催化材料

采用静电自组装方法制备了纳米TiO2/SiO2光催化材料。采用巯丙基三甲氧基硅烷偶联剂对SiO2进行干法改性,采用双氧水/冰醋酸将偶联剂巯基基团氧化为磺酸基基团。在正负电荷的吸引下,带负电荷的SiO2与带正电荷的钛聚合阳离子自发地组装在一起,经一定温度热处理得到纳米TiO2/SiO2光催化材料。采用XRD、FTIR、PL、UV-Vis DRS、SEM和ICP等对材料进行了分析和表征。采用甲基橙溶液评价材料的光催化性能。结果表明:SiO2促使锐钛矿的形成,抑制锐钛矿向金红石的转变,减小TiO2的晶粒尺寸,使得TiO2光吸收波长发生蓝移。TiO2与SiO2通过Si-O-Ti键发生结合。采用静电自组装方法制备的材料中TiO2的含量高于传统方法,导致材料的光催化性能有所提高。     

Enhanced Visible‐Light‐Induced Photoelectrocatalytic Degradation of Methyl Orange by CdS Sensitized TiO2 Nanotube Arrays Electrode

In this work, CdS sensitized TiO₂ nanotube arrays (CdS/TiO₂NTs) electrode was synthesized with the CdS deposition on the highly ordered titanium dioxide nanotube arrays (TiO₂NTs) by sequential chemical bath deposition method (S‐CBD). The as‐prepared CdS/TiO₂NTs was characterized by field‐emission scanning electron microscopy (FE‐SEM) and X‐ray diffraction (XRD). The results indicated that the CdS nanoparticles were effectively deposited on the surface of TiO₂NTs. The amperometric I‐t curve on the CdS/TiO₂NTs electrode was also presented. It was found that the photocurrent density was enhanced significantly from 0.5 to 1.85 mA/cm² upon illumination with applied potential of 0.5 V at the central wavelength of 253.7 nm. The photoelectrocatalytic (PEC) activity of the CdS/TiO₂NTs electrode was investigated by degradation of methyl orange (MO) in aqueous solution. Compared with TiO₂NTs electrode, the degradation efficiencies of CdS/TiO₂NTs electrode increased from 78% to 99.2% under UV light in 2 h, and from 14% to 99.2% under visible light in 3 h, which was caused by effective separation of the electrons and holes due to the effect of CdS, hence inhibiting the recombination of electron/hole pairs of TiO₂NTs.     

稀土Ce掺杂对ZnO结构和光催化性能的影响

采用共沉淀-焙烧法合成了一系列不同含量的稀土Ce掺杂的ZnO光催化剂. 利用傅里叶变换红外(FT-IR)光谱、粉末X射线衍射(XRD)、扫描电镜(SEM)、紫外-可见(UV-Vis)光谱、光致发光(PL)谱等技术对所制备的光催化剂进行了系列表征. 以酸性橙II脱色降解为模型反应, 考察了掺杂不同含量的铈及不同焙烧温度对ZnO的物理结构和光催化脱色性能的影响. 结果表明: 掺入质量分数(w)为2%的铈可以明显改善氧化锌表面状态, 有利于产生更多的表面羟基; 同时可以抑制光生电子与光生空穴(e^-/h⁺)的复合, 显著提高光催化脱色活性和光催化稳定性; 焙烧温度对光催化剂的晶体结构、表面性能和光催化活性产生较大影响, 500 °C的焙烧处理使样品的结晶度较高, 同时催化剂颗粒粒径较细, 表面具有丰富的羟基. 但过高的焙烧温度(600-800 °C)将导致催化剂的物理结构发生恶化, 降低光催化性能.